Posted by One of the main problems with marble is that it is prone to staining and corrosion, especially if there is a lot of sulphur dioxide on it. The Thomas Jefferson Memorial in Washington, D.C., and the Taj Mahal in India are three examples of famous monuments where this problem occurs. Luckily, there are several ways to avoid this. By following a few steps, you can keep your sculptures/god statues/murti in good condition.
The main problem with traditional marble cleaning methods is that they usually contain strong acid which can ruin the surface of the monument. One 19th century remedy suggested a mixture of soap, quick lime, and caustic potash, which was applied using a brush. The mixture was left on the marble for a few days, then wiped off. To prevent further stains, you can use a poultice, soda, and pumice.
Another common cause for marble statues to get stained or corroded is acid rain. This substance is a serious problem for buildings because it erodes metal. Luckily, many materials that are made of calcium carbonate are unaffected by the acid rain, which only affects those made of calcium carbonate. Among the most vulnerable stone materials are limestone and marble, which contain calcite, which reacts with weak acid to produce an indentation.
Regularly cleaning marble statues is an important part of maintaining their beauty. If you’re concerned about a certain type of stain, you can use baking soda paste. However, if you’re worried about a particular type of stain, you can also try dilute ammonia to remove it. If the stain is too deep, you can apply a paste of ammonia and water, or even a mixture of baking soda and milk.
It is important to use a suitable cleaning agent for your statues. Acidic solutions can cause permanent damage to marble and make it look dull. Instead of using strong acidic cleaners, use mild pH-balanced products to remove dirt. In case of deep staining, you can use a poultice, which can be extremely effective in removing the stain.
If you have a marble statue, make sure you don’t let acid rains damage it. Acid rain can cause damage to buildings and the surface of a statue. In addition to acidic rains, a marble statue is not immune to acid-based materials. While strong acids will corrode metal, marble is susceptible to acid-based compounds. This is the case for most limestone and marble, which contain calcite.
Keeping a statue clean is vital for the beauty of your God statues/murti. Acid rain can damage buildings and metal. If you live in an area with acid rains, you should avoid using the statues. These statues will be vulnerable to acid erosion, etching, and corroding. But you can safely clean imitation marble by following some simple steps. You can apply diluted ammonia to the statues to remove stubborn stains.
If you have marble statues, you should regularly clean them with a mild acid-based product. You can also apply baking soda to the statues to remove stains. If the stains are old, you can use a paste made of baking soda and milk to clean them. But always beware of acids-based drinks on marble. They can etch or stain the statues and can even damage the surface.
You should avoid acidic items in order to prevent damage to your precious lord statues. In addition to this, you should avoid water-based cleaners and acid-based solutions. These substances contain sulfuric acid, which can erode the surface of marble. And these materials tend to be more vulnerable to acid erosion than most other materials. The corrosive action of acids can also lead to indentation, cracks, and other damage.